ACTi ENR-140 Installation Guide download pdf (Page 93)

www.acti.com

ENR-100 Series System Administrator’s Manual

Set Date & Time

Go to Setup page  System tab Date and Time

You may configure other time-related settings here.

Change Time Zone

Select the time zone where ENR server belongs to. After selecting the time zone, it will

change to the corresponding date and time.

Change Date and Time

It shows the current date and time on the device. Click

to bring up the calendar. Input the exact date and time, then click “OK”.

Set Daylight Saving

If the device is located in an area where daylight saving time is used, click the check box to

enable daylight saving. The time will be automatically adjusted. When the daylight saving time

has finished, uncheck the box to return to original setting.

Set NTP Server

Please enter a NTP server address and click “Apply” to synchronize time with the NTP server.

Make sure ENR has connection with the NTP Server.

To delete this NTP server, simply clear its address in this field and click “Apply”.

Note

If your NTP server is a domain name address, make sure you have configured the DNS

Setting and chosen appropriate Default Gateway on Setup page  System tab Network

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 138 139

No comments

ACTi ENR-140 Installation Guide Page 93