ACTi ENR-140 Installation Guide download pdf (Page 48)

www.acti.com

ENR-100 Series System Administrator’s Manual

Configure PTZ Presets

With PTZ cameras, you may define a view by where to look (through panning and tilting) and

how close (through zooming) to zoom. Once these views have been saved in ENR as preset

points, the device can always point to this view upon the event triggering or user’s command.

For local operation, the PTZ-related configurations are done on Live screen. Please note that,

the PTZ-related settings you configure here will overwrite those on camera’s firmware.

Open PTZ Panel

On Live screen, select a PTZ channel, the PTZ panel will become enabled.

Manipulate PTZ Movements

Click the tab to enter PTZ operation mode, and make

make use of the device’s PTZ capabilities to define a view.

Function

Eight-direction arrow keys

Click to pan or tilt the camera (only available for cameras

with Pan/Tilt/ capability).

Pan/Tilt/Zoom speed

Click to change the speed. Provided speed scale is

from 1 to 5 (available for cameras with Pan/Tilt/Zoom

capability).

Auto focus (available for cameras with auto focus

capability)

Zoom (Available for cameras with a controllable

zoom) Zoom in Zoom out

Manual focus

(Available for cameras with a controllable focus)

Near focus Far focus

These buttons are enabled when the “Auto Focus” is

disabled.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 138 139

No comments

ACTi ENR-140 Installation Guide Page 48