ACTi ENR-140 Installation Guide download pdf (Page 69)

www.acti.com

ENR-100 Series System Administrator’s Manual

Send Mail

Enable ENR to send e-mail notifications via SMTP service.Check the “Enable” to enable

this function, and fill in the mail recipient’s e-mail address in “To” field, notification title in

“Subject” field and mail body in “Body” field, then choose a camera whose snapshot will

be attached from Attach a Snapshot dropdown list. Clik “OK” to confirm. Please note

that if you want to attach a snapshot to the notification e-mail, make sure your local

display stays on Live screen during the event handing period, in this way, ENR can take

the snapshots for motion events.

To enable this service, you have to configure the e-mail setting (please refer to E-mail

Settings on page 58) before this trigger is enabled.

Go to Preset

For the use of PTZ cameras to make movements toward certain triggers, please

configure the preset points (refer to 49Go to Preset Points on page 49) on Live screen

before you set the event rule.

On Go to Preset tab, check the “Enable” to enable this function (if there is no PTZ

camera exsiting in ENR server to execute a PTZ response, a red sign would appear on

the tab , please add a PTZ camera). Select which PTZ camera in ENR

server to make the movement, then the preset points and duration time between them.

Click “OK” to confirm.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 138 139

No comments

ACTi ENR-140 Installation Guide Page 69