ACTi ENR-140 Installation Guide download pdf (Page 118)

www.acti.com

ENR-100 Series System Administrator’s Manual

118

Field

Description

Pre-event Recording

Buffer (sec):

ENR keeps a short cache of video received from devices. If an event

is triggered, ENR will automatically store the pre-event buffer along

with the recording of the event itself.

Post-event Recording

Buffer (sec):

This will determine how long after the event is triggered should be

included in the event recording file.

Set the Recording Schedule

1. Select a recording type.

2. On the recording schedule time table, click and drag to set time period.

3. Click “Save”

4. To delete the recording configuration, select and drag on the desired

section on time table.

Set the Event Handling Schedule

The Event Schedule defines when the event handling is activated. To set the event rules,

please refer to Set Event Rules on page 120. By default, the event handling is full-time

activated; you may disable it for a certain period.

Field

Description

Full-Time Recording

Continuously record at the video frame rate you define in Camera

Settings.

Event Recording

Only events are recorded, at the video frame rate you define in

Camera Settings.

Event Speed Up

Recording

Continuously record everything at 1FPS, when an event occurs, the

frame rate will switch to the value you define in Camera Settings,

and automatically switch back to 1FPS after the event ends.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 138 139

No comments

ACTi ENR-140 Installation Guide Page 118