ACTi ENR-140 Installation Guide download pdf (Page 27)

www.acti.com

ENR-100 Series System Administrator’s Manual

ENR-110/120/130

ENR-140

LAN 2 Port

LAN2 port is a typical Ethernet port. You will have to use this port to connect with a different

network segment when your system requires (1) the connection with a remote PC client or

network cameras, (2) the use of event-triggered e-mail service via an external SMTP server

(3) the use of date/time synchronization with external NTP server.

By default, once connecting to a network, it will first try to get an IP address assigned by your

network router from DHCP server. If your network does not assign IP address automatically,

then LAN2 port will assume IP address 192.168.1.10.

Connection Setting Example 2

The diagram below displays an example connection setting using LAN1 + LAN2 to connect

networks cameras within different network segments.

192.168.0.101 ~ 192.168.0.104

LAN 1: 192.168.0.10

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 138 139

No comments

ACTi ENR-140 Installation Guide Page 27