Acti ENR-1000 User Manual download pdf (Page 65)

www.acti.com

ENR-1000 Series System Administrator’s Manual

Event-Recording File Length

Before setting the recording schedule, you may define the length of an event recording. To do

this, configure the following properties shown as below, which will make an event recording

as long as 10+30 second:

Field

Description

Pre-event Recording

Buffer (sec):

ENR keeps a short cache of video received from devices. If an event

is triggered, ENR will automatically store the pre-event buffer along

with the recording of the event itself.

Post-event Recording

Buffer (sec):

This will determine how long after the event is triggered should be

included in the event recording file.

Set the Recording Schedule

On the time table

1. Click on the recording mode from

Field

Description

Full-Time Recording

Continuously record at the video frame rate you define in Camera

Settings.

Event Speed Up

Recording

Continuously record everything at 1FPS, when an event occurs, the

frame rate will switch to the value you define in Camera Settings,

and automatically switch back to 1FPS after the event ends.

Event Recording

Only events are recorded, at the video frame rate you define in

Camera Settings.

2. Click and drag over the “Time Track” to set time period.

3. Click “Save”.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 142 143

No comments

Acti ENR-1000 User Manual Page 65