Acti ENR-1000 User Manual download pdf (Page 115)

www.acti.com

ENR-1000 Series System Administrator’s Manual

115

Configure PTZ Preset Points

With PTZ devices, you may define a view by where to look (through panning and tilting) and

how close (through zooming) to zoom. Once these views have been saved in ENR as preset

points, the device can always point to this view upon the event triggering or user’s command.

Go to Setup page  Camera tab, select a PTZ camera from All Cameras list, and click .

Check the “Enable PTZ” box to start setting the preset points.

1. On mini live window, use the mouse to do the following PTZ operations:

 To execute optical Panning and Tilting, click anywhere on the live window to allow

the camera to move in that direction. The length of the direction indicator is proportional

to the Pan and Tilt speed. The farther you place the cursor from the center, the faster the

Pan/Tilt movement.

 To execute optical Zoom in or Zoom out, scroll the mouse wheel forward to zoom in;

scroll the mouse wheel backward to zoom out.

By default, ENR will communicate ACTi devices with the default settings, in which

case you will not need to configure any property. For certain PTZ solutions, such as

a hemispheric camera in 6VGA mode or an analog PTZ device attached to an ACTi video

server, you will need to enable the PTZ properties on ENR interface.

Brand

PTZ Device Types

Requires enabling of PTZ

on ENR interface

ACTi

IP Speed Dome

IP Zoom Camera / IP PTZ Camera

Hemispheric / Fisheye Dome

IP Camera mounted on Scanner/ Analog

PTZ camera attached to Video Server

Others

All devices with PTZ functions

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 142 143

No comments

Acti ENR-1000 User Manual Page 115