Acti ENR-1000 User Manual download pdf (Page 46)

www.acti.com

ENR-1000 Series System Administrator’s Manual

Configure PTZ Devices

PTZ devices can do panning, tilting and zooming automatically or through manipulation. The

PTZ-related applications are broadly supported by ENR. For example, you may control the

movements of a PTZ camera with user interface panel controls or a joystick; the device can

be programmed to execute a continuous tour or triggered by events to go to a preset position.

By default, ENR will communicate ACTi devices with the default settings, in which

case you will not need to configure any property. For certain PTZ solutions, such as a

hemispheric camera in 6VGA mode or an analog PTZ device attached to an ACTi video

server, you will need to enable the PTZ properties on ENR interface.

Brand

PTZ Device Types

Requires enabling of PTZ

on ENR interface

ACTi

IP Speed Dome

IP Zoom Camera / IP PTZ Camera

Hemispheric / Fisheye Dome

IP Camera mounted on Scanner/ Analog

PTZ camera attached to Video Server

Others

All devices with PTZ functions

To enable PTZ function on ENR interface:

Go to Setup page  Camera tab, select the device from Camera List, click , check

“Enable PTZ”, and then click “Apply”.



To enable an analog camera attached to video server:

1. Configure the parameters (e.g. Vendor, Protocol, Baud rate, Address ID) on physical

device according to the product’s installation instructions. On the device’s (camera or

video server) web configurator, configure the parameters to match the setting on physical

device, and test the PTZ operations to make sure the device is properly set to be

connected with.

2. On ENR interface go to Setup page  Camera tab, select the device from Camera List,

click , check “Enable PTZ”, configure the settings to ensure that they match those

on the physical devices and the web configurator, and then click “Apply”.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 142 143

No comments

Acti ENR-1000 User Manual Page 46