Acti ENR-1000 User Manual download pdf (Page 24)

www.acti.com

ENR-1000 Series System Administrator’s Manual

Network Connection Architecture

When connecting ENR with your network, please make sure you plug the network cable into

the right port.

LAN 1 Port

LAN 1 port is the default camera port for a typical local network. Via this port, the DHCP

server built in ENR automatically assigns IP addresses to network cameras once they are

connected. With this feature, you do not have to bother arranging the camera IP addresses

on your own. By default, this DHCP server is enabled, so please avoid connecting ENR to a

network where exits another DHCP server via this port.

Connection Setting Example 1

The diagram below displays a connection setting example using only LAN1 to connect

networks cameras.

In this setting, ENR altogether with cameras are within the same network segment; in the

mean time, there is no need of referencing another DHCP server in this system.

LAN 1

Port (Camera Port)

Default:

192.168.0.10

LAN 2

Port (WAN Port)

Default:

Dynamic /192.168.1.10

192.168.0.101 ~ 192.168.0.104

LAN 1: 192.168.0.10

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 142 143

No comments

Acti ENR-1000 User Manual Page 24