4” Outdoor Dome Series Hardware Manual D71, D72, D81, D82, E71, E72, E73, E74, E81, E82, E83, E84, E85, E86 2013/12/11
www.acti.com Hardware Manual 10 Mounting Options There are several mounting options that you can use to install the camera. Select t
www.acti.com Hardware Manual 11 Straight Wall Mount Suitable when mounting the camera on straight walls. PMAX-0308 (L-Type Wall Mou
www.acti.com Hardware Manual 12 Other Mounting Accessories Accessories PMAX-0104 (Extension Tube) NOTE: For more informatio
www.acti.com Hardware Manual 13 Installing the Camera on a Surface This section describes the procedures in installing the camera on
www.acti.com Hardware Manual 14 Step 2: Open the Dome Cover 1. Remove the plastic covering the camera. 2. Loosen the three (3) scr
www.acti.com Hardware Manual 15 Step 3: Prepare for Waterproof Installation The camera comes with two (2) glands used for waterproof
www.acti.com Hardware Manual 16 Waterproof Solution with Naked Cable This section describes the procedures in using the bundled cabl
www.acti.com Hardware Manual 17 4. Attach the cable gland body to the hole of the camera. Attach to Camera Side Hole
www.acti.com Hardware Manual 18 Waterproof Solution with Conduit This section describes the procedures to waterproof the cabling con
www.acti.com Hardware Manual 19 2. Disassemble the bundled conduit gland as shown below: NOTE: In this installation, the conduit g
www.acti.com Hardware Manual 2 Table of Contents Precautions ... 4 Safety
www.acti.com Hardware Manual 20 5. Insert the sealing insert and attach it at the end of the flex conduit. 6. Screw the co
www.acti.com Hardware Manual 21 b. Insert the sealing nut into the conduit gland body and then attach the clamping nut to complete
www.acti.com Hardware Manual 22 Step 5: Connect the Cable 1. If the cable will be routed along the surface, pull the network cable
www.acti.com Hardware Manual 23 Step 6: Access the Camera Live View See Accessing the Camera on page 30for more information on how t
www.acti.com Hardware Manual 24 Other Adjustments and Accessories Focus and Viewing Angle Adjustments This section describes the pro
www.acti.com Hardware Manual 25 1. Loosen the tilt adjustment screws, adjust the tilt, and then tighten back the screws to fix the
www.acti.com Hardware Manual 26 D8x / E8x Series Camera Parts Overview Adjustment Procedures 1. Loosen the tilt adjustment screw
www.acti.com Hardware Manual 27 Replacing the Dome Cover For more discrete surveillance needs, the bundled dome cover can be replace
www.acti.com Hardware Manual 28 4. Remove dome cover from the cover housing. 5. Remove the shroud from the dome cover. 6. I
www.acti.com Hardware Manual 29 8. Align and attach the three (3) screws to secure the bracket to the cover housing. 9. Fit t
www.acti.com Hardware Manual 3 Replacing the Dome Cover ... 27 Acc
www.acti.com Hardware Manual 30 Accessing the Camera Configure the IP Addresses In order to be able to communicate with the camera f
www.acti.com Hardware Manual 31 By double-clicking on the camera model name it is possible to automatically launch the default brows
www.acti.com Hardware Manual 32 Use the default IP address of a camera: If there is no DHCP server in the given network, the user ma
www.acti.com Hardware Manual 33 Manually adjust the IP addresses of multiple cameras: If there are more than 1 camera to be used in
www.acti.com Hardware Manual 34 Access the Camera Now that the camera and the PC are both having their unique IP addresses and are u
www.acti.com Hardware Manual 35 The following examples in this manual are based on Internet Explorer browser in order to cover all f
www.acti.com Hardware Manual 36 To check the firmware version through the Web Configurator, access the Setup page and click System &
www.acti.com Hardware Manual 4 Precautions Read these instructions You should read all the safety and operating instructions before
www.acti.com Hardware Manual 5 Federal Communications Commission Statement This equipment has been tested and found to comply with t
www.acti.com Hardware Manual 6 Safety Instructions Cleaning Disconnect this video product from the power supply before cleaning. At
www.acti.com Hardware Manual 7 Introduction The List of Models This hardware manual contains the following models: D71 1MP Outdoor
www.acti.com Hardware Manual 8 Package Contents D7x / D8x / E7x / E8x Series Camera (D7x / E7x Series) Camera (D8x / E8x Series) M
www.acti.com Hardware Manual 9 Physical Description 1) Reset Button The purpose of reset button is to restore the factory default
Comments to this Manuals