ACTi D72 Manual download pdf (Page 17)

www.acti.com

Hardware Manual

4. Attach the cable gland body to the hole of the camera.

Attach to Camera Side Hole Attach to Camera Bottom Hole

5. If the cable will be routed along the surface, skip this step.

If the cable will pass through the surface, do the following:

a. Pull the network cable through the bottom conduit hole.

b. Insert the sealing insert with claw into the cable gland body and then attach the clamping

nut to complete the cable solution.

NOTE: Make sure the clamping nut is tightly attached to the cable gland body and the sealing

insert is squeezed tightly.

6. Proceed with Step 4: Install the Camera to the Surface on page 21.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

ACTi D72 Manual Page 17