ACTi B55 Manual download pdf (Page 25)

www.acti.com

Hardware Manual

Use the default IP address of the camera

If there is no DHCP server in the given network, the user may have to manually assign the IP

addresses to both the PC and the camera to make sure they are in the same network

segment.

When the camera is plugged into the network and it does not detect any DHCP services, it will

automatically assign itself a default IP:

192.168.0.100

Whereas the default port number would be 80. In order to access that camera, the IP address

of the PC has to be configured to match the network segment of the camera.

Manually adjust the IP address of the PC

In the following example, based on Windows 7, we will configure the IP address to

192.168.0.99 and set Subnet Mask to 255.255.255.0 by using the steps below:

1 2 ... 20 21 22 23 24 25 26 27 28

No comments

ACTi B55 Manual Page 25