Hardware Manual
9
Physical Description
Used to restore the factory default settings, including the
administrator’s password. Using a pointed object, such as a pen,
press and hold the Reset button for 5 seconds or until the Power
LED lights up.
Connects to digital input or output devices, such as an alarm
trigger, panic button, etc. Digital Input (DI) and Digital Output
(DO) devices are used in applications like motion detection,
event triggering, alarm notifications, etc. See Prepare the DI/DO
Connector (Optional) on page 12 for information on how to
connect DI/DO devices to your camera.
Connects to audio output devices, such as a speaker, etc.
Insert a memory card (not included) into the slot for local
recording purposes.
NOTE: Supports only microSDHC and microSDXC cards.
Connects to audio input devices, such as a microphone with
built-in amplifier, etc.
NOTE: The microphone must have a built-in amplifier.
Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adaptor. See Prepare the Power Adaptor
(Optional) on page 10 for information.
Lights up when the camera is powered on.
Connects to a network using a standard Ethernet cable.
Comments to this Manuals