ACTi I51 User Manual download pdf (Page 45)

www.acti.com

Firmware User’s Manual V6.08.30

The security method of SNMP V3 uses account/password for authentication. “Security Name” is

the account name to be used with your “Password”. The default security name is “public” and the

password must be at least 8 characters long. You also can set any other security name or

password. Click “Apply” after you’ve completed setup.

SNMP function is now enabled. You may now install and run the SNMP management software on

computer server.

SNMP Trap Usage:

SNMP traps enable notifications from devices. Devices may send message to the management

server whenever significant events occur such as cold start, warm start and authentication failure.

The manager will get the information immediately and take action if necessary.

Cold start means device reboot by power disconnection. Warm start means device reboot by

firmware without power disconnection. If there other parties attempt to connect to the device with

wrong security password under SNMP V1, V2 or V3 setting, the device will send an

authentication failure message to the management server.

To enable SNMP Trap function in the camera, type the IP address of the computer running the

SNMP management software and type trap community as password to allow server to get trap

message from device (Default is public). Select available traps and click “Apply”.

Camera’s SNMP offers following information:

Group

Description

System

Provide general information about the managed device.

Ex: system description, system name.

Interface

Provide general information from the physical interfaces.

Ex: interface speed, MAC address.

Address

Translation

Provide information about the mapping between network addresses and physical

addresses for each physical interface

Ex: The IP/MAC addresses to connect to the managed device.

Provide the status and operation of Network Layer (Layer 3).

Ex: the information and traffic flow of received/delivered package.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 118 119

No comments

ACTi I51 User Manual Page 45