ACTi GNR-3000 User Manual download pdf (Page 66)

www.acti.com

GNR-3000 System Administrator’s Manual

Device Status

To validate if you have successfully added a device to NVR

system, simply check the Device List on the left of Setup

Devices tab to see if the device name appears in the tree.

Point your mouse cursor over the device icon will bring up an

information box containing the device’s IP Address, HTTP Port,

Protocol and device type.

Status Icon Description

Icon

Status Description

NVR server cannot retrieve video streaming. This may be that a video server is

not connected with cameras, or that the streaming is blocked by the firewall

between the device and NVR server. Please (1) ensure the device side is well

connected and can output video normally,(2) check the firewall and port

forwarding settings.

This device’s settings have been modified but not saved yet. If you leave these

modifications unsaved, they will not take effect by next time the server starts.

Please always remember to save upon every change.

NVR cannot build up connection with this device. Please check the device

connection settings (including IP Address, Port number, Account Name and

Password); or increase the “Connection Timeout” to allow more time for the

device to respond.

This device is currently connected, video is being transmitted and no recording is

proceeding.

This device is currently connected, and video is being recorded either manually

or according to the schedule.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 149 150

No comments

ACTi GNR-3000 User Manual Page 66