GNR-3000 System Administrator’s Manual
19
Hard Disk Installation
For video recordings, you should install at least ONE certified 3.5-inch SATA hard disk. Be
sure to use the hard disk models ACTi tested to be compatible with GNR-3000, and it’s
strongly recommended that you use hard disks of the same model and capacity. You may find
the certified models via http://www.acti.com/hddselector.
The actual necessary space depends on number of devices, recording and event rules settings.
To get an approximate value, you may use the software tool Bandwidth & Storage Calculator
- http://www.acti.com/storagecalculator.
You can install up to four disks into Storage Disk Bays. During the installation, please avoid
removing the System Disk Bay.
Repeat Step 1~3 to finish installing all the storage disks. During the installation, please avoid
removing the System Disk Bay.
Step 1: Remove the Tray
Slide the Lock Tab up, the Hinge Tab will pop out by itself.
Pull the Hinge Tab to 90 degrees from the front, and then pull out the tray.
Comments to this Manuals