ACTi E85 User Manual download pdf (Page 29)

E85 Heating/Air Conditioning System

Control Panel/Control Module Mounting

The “island” design requires a different mounting concept. The control panel/control mod-

ule is mounted from the rear in the instrument panel. 3 trim rings can be individually

replaced from the front. The control panel/control module is secured by 2 side clips and 2

screws at the top.

The IHKS control panel/control module can only be replaced as a complete unit. Individual

parts such as rotary knobs cannot be replaced. To remove this, it is first necessary to

remove the center fresh air grille outlet and the radio. The control panel/control module can

then be removed by pulling down through the service opening in the instrument panel.

NNoottee::

Particular care must be

taken when removing the control

panel/control module to avoid

scratches on the front of the unit.

1. Mounting opening for the control

panel/control module.

2. Service opening for the control

panel/control module.

Heater/Air Conditioner Mounting

The heater/air conditioner is

mounted by 4 mounting domes

on the support tube between the

A pillars.

The heater/air conditioner is

secured by 4 plastic screws. The

plastic screws can be reused sev-

eral times. Repair kits for the

mounting domes are available.

1. Mounting domes

1 2 ... 24 25 26 27 28 29 30 31

No comments

ACTi E85 User Manual Page 29