ACTi ACM-3001 User Manual download pdf (Page 9)

www.acti.com

ACM-3001 Hardware User’s Manual

Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.)

Step 3: Reconnect the power cable while continuing to hold the reset button. The red

Power LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another

second and turn off again. By this time the reset to default operation is already completed. This

will take around 20 seconds from power up. You may then release the reset button. This

length of time fluctuates slightly with the environment. The Power LED light will come back on

and stay on after a few more seconds. The unit will start up with factory default settings

automatically.

On (3s)

Power On

About 20 Seconds

Stay On

Off (about 15s)

Off (10~15s)

Restore to Default

Complete

4) Digital Input / Output *

The IP PoE Fixed Dome Camera supports Digital Input / Output with terminal block connections.

Pushing down the tab above will reveal a small slot for you to insert the end of wire. Release the

tab and the wire will be fastened by the internal spring. The connection pins are as shown in this

image:

Digital Input / Output include the following:

•1 transistor output - For connecting external devices such as relays and LEDs. Connected

devices can be activated by Output buttons on the Live View page or through video management

software.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

No comments

ACTi ACM-3001 User Manual Page 9