ACTi ACM-3001 User Manual download pdf (Page 10)

www.acti.com

ACM-3001 Hardware User’s Manual

•1 Digital Input - An alarm input for connecting devices that can toggle between an open and

closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. The device

will detect the change in digital input and transmit the signal to video surveillance servers.

Terminal Pin Define is described as below:

* Available only for device versions with enhancements

5) Audio Input / Output

The IP PoE Fixed Dome Camera supports Audio input / output with terminal block connections.

Pushing down the tab above will reveal a small slot for you to insert the end of wire. Release the

tab and the wire will be fastened by the internal spring. The connection pins are as shown in this

image:

Pin Name

Description

Spec

DIO PW

Electrically connected in parallel with the con-

nector for the power supply, this pin provides an

auxiliary connector for mains power to the unit.

This pin can also be used to power auxiliary

equipment, with a maximum current of 100mA.

Voltage: 12V DC,

Max: 1.2W

DIO GND

Ground

Description

(Transistor

Output)

Uses an open-collector NPN transistor with the

emitter connected to the GND pin. If used with an

external relay, a diode must be connected in

parallel with the load, for protection against

transient voltages.

Max load = <100mA

Max voltage = 24V

DC (to the

transistor)

(Digital

Input)

Connect to GND to activate, or leave floating (or

unconnected) to deactivate.

Must not be

exposed to

voltages greater

than 30V DC.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Comments to this Manuals

No comments

ACTi ACM-3001 User Manual Page 10

Comments to this Manuals

Related products and manuals for Security cameras ACTi ACM-3001