ACTi TCM-6630 User Manual download pdf (Page 39)

www.acti.com

TCM-6630 Hardware User’s Manual

The Cruise line can be defined in CRUISE setup menu.

 DWELL TIME

The DWELL TIME is the duration of executing ALARM ACTION: Preset or Sequence. When

alarm takes place, the dome will go to the preset position or execute sequence function and

stay at each sequence point for a period of time (1~127 seconds). If select <Always>, the

dome will go to the preset position and stay there until alarm condition is released or users

rotate the dome.

 EXIT

Exit the ALARM SETTING menu.

HOME SETTING

Users are able to set an operation mode to ensure constant monitoring; if the dome idles for a

period of time, the pre-set function will be activated automatically, this is the HOME function. HOME

function allows constant and accurate monitoring, to avoid the speed dome stops or missing

events.

 HOME FUNCTION

The item is used to enable or disable the HOME function.

 SELECT MODE

Select one of the modes that the dome should execute when HOME function is enabled and

the RETURN TIME is up. The options are <AUTOPAN>, <SEQUENCE>, <CRUISE> and

<PRESET>.

NOTE: The DWELL TIME is only accessible when selecting

ALARM ACTION: Preset or Sequence.

HOME SETTING

HOME FUNCTION OFF

SELECT MODE PRESET

PRESET POINT 001

RETURN TIME 001

GO ENTER

EXIT YES

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 54 55

No comments

ACTi TCM-6630 User Manual Page 39