ACTi KCM-5311 User Manual download pdf (Page 10)

www.acti.com

KCM-5311E Hardware User’s Manual

• 1 Transistor Outputs - For connecting external

devices such as relays and LEDs. Connected devices

can be activated by Output buttons on the Live View

page or through video management software. Connect

DO1 and DO2 to their closest 12V pin to activate.

• 2 Digital Inputs - An alarm input for connecting devices that can toggle between an open

and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. The

device will detect the change in digital input and transmit the signal to video surveillance

servers. The I/O terminal pins are numbered right to left,

Connect input/output devices to the camera as follows:

1. Attach the cables for the device securely to the supplied green connector block. Connect DI

pins to GND pins, and DO pins to 12V pins. Link pins 1/3, 2/4, 5/7,6/8.

2. Once cables are connected, push connector block into the terminal connector on camera.

FUSE 1A

NPN

DC TO DC

3.3V

DC POWER

GND

CONVERTER

EARTH GND

RELAY

DIODE

DEVICE

POWER INPUT

CAMERA

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

No comments

ACTi KCM-5311 User Manual Page 10