ACTi D65A User Manual download pdf (Page 71)

www.acti.com

Firmware User’s Manual V6.08.30

Day/Night

The section Day/Night allows user to control the switching between day mode and

night mode. This section will be displayed only for day/night models.

Parameters

Description

Day/Night mode

There are three modes:

Auto: The camera will automatically switch between day mode (color)

and night mode (black/white) under certain exposure level, defined by

user at “Switch from Day mode to Night mode”.

Day: The camera always stays in day mode (color) regardless of

exposure level.

Night: The camera always stays in night mode (black/white)

regardless of exposure level.

IR LED Control

This feature is visible only in cameras with built-in IR LED.

There are two modes:

Auto: The built-in IR LED will be turned on automatically upon day to

night switch and turned off upon night to day switch.

Disabled: The IR LED will be off regardless of day and night mode.

Zoom cameras have adaptive IR profile, which means that when IR

LED Control is set to “Auto” (default setting), the IR LED

automatically adapts to the required IR LED power as the camera is

zoomed in or out.

IR LED Strength Level

This feature is visible only in fixed and vari-focal lens cameras with

adaptive IR profile and when IR LED Control is set to “Auto”.

The scale of 1~10 allows the user to manually define the power level

of the IR LED. The higher the value, the brighter the IR LED is. Set

the IR LED Strength Level according to the installation environment

requirement, or set it to “OFF” to turn off the IR LED.

Switch from Day mode

to Night mode

The scale of 0~100 allows user define the exposure level at which the

day to night switch should happen. The higher is the value, the darker

the environment has to be to trigger the day to night switch.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 118 119

No comments

ACTi D65A User Manual Page 71