ACTi ACM-4201 User Manual download pdf (Page 10)

www.acti.com

ACM-4201 Hardware User’s Manual

Connect input/output devices to the camera as follows:

1. Attach the cables for the device securely to the supplied green connector block.

2. Once the cables are connected, push the connector block into the terminal connector (also

green) on the camera.

8) Reset Button

Step 1: Switch off IP device by disconnecting the power cable

Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.)

Step 3: Reconnect the power cable while continuing to hold the reset button. The Power

LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another

second and turn off again. By this time the reset to default operation is already completed.

This will take around 20 seconds from power up. You may then release the reset button.

This length of time fluctuates slightly with the environment. The Power LED light will come

back on and stay on after a few more seconds. The unit will start up with factory default

settings automatically.

On (3s)

Power On

About 20 Seconds

Stay On

Off (about 15s)

Off (10~15s)

Restore to Default

Complete

FUSE 1A

NPN

DC TO DC

3.3V

DC POWER

GND

CONVERTER

EARTH GND

RELAY

DIODE

DEVICE

POWER INPUT

CAMERA

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

ACTi ACM-4201 User Manual Page 10