Acti PMON-2000 User Manual download pdf (Page 1)

After mounting an IP camera, use the

Camera Installation Kit to power up the

camera via Power-over-Ethernet (PoE).

1. Switch the device POWER On then press

and hold for 3 seconds.

After the device boot up process, the main menu screen appears. Tap the screen with

the bundled stylus or use the Navigation Keys to move through the menu.

1. Tap PoE ON to use the device power to power on the camera.

This button turns to to indicate PoE is already enabled.

2. Tap IP Camera .

3. Tap Connect .

The camera Live View appears. The functions displayed on the screen may vary

depending on the type of camera connected.

• To adjust focus manually, press or . Or, to set to auto focus, press and at

the same time.

• To zoom image in our out one step at a time, press or .

• To zoom to maximum zoom view, tap

Zoom

• When zoomed, tap

Z & F

to switch to Pan & Tilt mode.

• In

P & T

mode, press or to pan and tilt the view.

• Tap

REC

to start or stop recording.

REC

indicates recording is in progress.

Zoom Cameras

Fixed or Vari-focal Cameras

• To zoom to maximum digital zoom view, tap

Zoom

• In

P & T

mode, press or to pan and tilt the view.

• Tap

REC

to start or stop recording.

REC

indicates recording is in progress.

Speed Dome Cameras

• To zoom image in our out one step at a time,

press or .

• To zoom to maximum zoom view, tap

Zoom

• To pan and tilt the view, press or .

• Tap

REC

to start or stop recording.

REC

indicates recording is in progress.

To view the camera Live View screen, perform the following:

IMPORTANT: To ensure optimum performance of cameras needing more than 6W

power, it is recommended to connect the device to either one of the following:

• Connect the device to an external power outlet using the DC 12V power adapter.

• Connect a PoE switch or injector to the LAN / PSE IN port of the Camera Installation

Kit and switch on Power Bank. Refer to the Product Manual downloadable from the

website for detailed instructions.

Power Bank Switch

Power Switch

Note: The boot up process may take a while to complete.

2. Make sure the Power Bank switch is Off.

3. Connect one end of the network cable to the camera and

the other end to the LAN / POE OUT port of the device.

Quick Installation Guide

V.2015.04.08

CAMERA INSTALLATION KIT

Step 5: Connect the Camera

Step 6: View the Camera

Step 7: Operate the Device

1 2

Summary of Contents

Page 1 - CAMERA INSTALLATION KIT

After mounting an IP camera, use the Camera Installation Kit to power up the camera via Power-over-Ethernet (PoE). 1. Switch the device POWER On the

Page 2 - Step 3: Power On

1. Switch the device power to ON.2. Press and hold the Power Key for at least 3 seconds.Forrst-timeuse,theTouch Calibration screen appears. Usi

Comments to this Manuals

No comments

Acti PMON-2000 User Manual Page 1

Browse online or download User Manual for Camcorders Acti PMON-2000. ACTi PMON-2000 User Manual

Summary of Contents

Comments to this Manuals

Acti PMON-2000 User Manual Page 1

Browse online or download User Manual for Camcorders Acti PMON-2000. ACTi PMON-2000 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Camcorders Acti PMON-2000