Acti D21FA User Manual

Box Camera Series Hardware Manual D21FA, D21VA, D22FA, D22VA E21FA, E21VA, E22FA, E22VA E23A, E24A, E25A E23B E270, E271 201

www.acti.com Hardware Manual 10 Physical Description D2xFA / E2xFA / E270 D2xVA / E2xVA / E23A / E24A / E25A / E271 1) Ethernet Port Connec

www.acti.com Hardware Manual 11 How to do the reset? Using a pointed object, such as a paper clip, press and hold the reset button for at least 5 se

www.acti.com Hardware Manual 12 E23B 1) Serial Port This port connects to serial devices via RS-485 or RS-422 protocols. Use the supplied serial

www.acti.com Hardware Manual 13 5) Power LED The Power LED turns on when the camera is powered on and the system is running. 6) Digital Input /

www.acti.com Hardware Manual 14 Mounting Options The camera can be installed both indoors and outdoors. For outdoor installation, additional waterpr

www.acti.com Hardware Manual 15 Mount Types Accessories Pole Mount (SMAX-0093) Suitable when mounting the camera on vertical poles. The camera

www.acti.com Hardware Manual 16 Before Installation This section describes the procedures in preparing the Digital Input and Output (DI/DO) and Audi

www.acti.com Hardware Manual 17 Press and hold the orange tab as you insert the wire through the pin slot, then release the orange tab to secure the

www.acti.com Hardware Manual 18 Typical Connection Based on these specifications, if the DI device has a voltage of 0V ~ 30V or the DO device has a

www.acti.com Hardware Manual 19 The illustration below is a graphic example of connecting a relay to a high voltage DO device. Relay (DO1 Device) )

www.acti.com Hardware Manual 2 Table of Contents Precautions ... 4 Safety Instructions ..

www.acti.com Hardware Manual 20 How to Connect Audio Devices Audio input / output devices, such as an active microphone or speaker can be connected

www.acti.com Hardware Manual 21 How to Connect a Serial Device (for E23B only) The camera can be connected to a Pan-Tilt (PT) Scanner (Pan-Tilt Head

www.acti.com Hardware Manual 22 CAUTION: Incorrect wiring may cause damage to the connected devices. DISCLAIMER: ACTi will not be responsible fo

www.acti.com Hardware Manual 23 Indoor Installation Procedures This section describes the procedures in installing the camera indoors using PMAX-110

www.acti.com Hardware Manual 24 3. Twist and pull to remove the cap covering the threaded end of the lens. D21FA / E21FA D22FA / E22FA / E270 D2xVA

www.acti.com Hardware Manual 25 Step 2: Attach the Mounting Block Determine where you want to install the camera: on the ceiling or on the wall. 

www.acti.com Hardware Manual 26 Step 3: Mount the Indoor Bracket NOTE:  The indoor bracket is not included in the camera package and must be pur

www.acti.com Hardware Manual 27 2. Slightly loosen the knurled knob. 3. Screw the camera to the bracket by its mounting block. 4. Tighten the

www.acti.com Hardware Manual 28 6. Tighten the knurled knob to fix the camera position. 7. Remove the protective cap from the lens (if any).

www.acti.com Hardware Manual 29 Step 5: Connect the Cable(s) 1. Connect the network cable to the Ethernet port of the camera. 2. If necessary, c

www.acti.com Hardware Manual 3 Other Adjustments and Accessories ... 31 How to Adjust the Viewing Angle and Focus ...

www.acti.com Hardware Manual 30 Step 6: Access the Camera Live View See Accessing the Camera on page 36 for more information on how to access the Li

www.acti.com Hardware Manual 31 Other Adjustments and Accessories How to Adjust the Viewing Angle and Focus This section describes the procedures in

www.acti.com Hardware Manual 32 D2xVA / E2xVA / E23A / E23B / E24A / E25A / E271 The camera comes with the focus and viewing angle already fixed. If

www.acti.com Hardware Manual 33 How to Install / Remove the Memory Card The camera supports local video recording or saving of snapshots to a memory

www.acti.com Hardware Manual 34 How to Replace the Lens Depending on your surveillance needs, the bundled lens can be replaced with a vari-focal len

www.acti.com Hardware Manual 35 4. For lens with DC-iris, connect the lens cable to the DC-iris port of the camera. 5. Pull to remove the protect

www.acti.com Hardware Manual 36 Accessing the Camera Configure the IP Addresses In order to be able to communicate with the camera from your PC, bot

www.acti.com Hardware Manual 37 Double-click the mouse button on the camera model, the default browser of the PC is automatically laun

www.acti.com Hardware Manual 38 Use the default IP address of a camera: If there is no DHCP server in the given network, the user may have to assign

www.acti.com Hardware Manual 39 Manually adjust the IP addresses of multiple cameras: If there are more than 1 camera to be used in the same local a

www.acti.com Hardware Manual 4 Precautions Read these instructions You should read all the safety and operating instructions before using this produ

www.acti.com Hardware Manual 40 Access the Camera Now that the camera and the PC are both having their unique IP addresses and are under the same ne

www.acti.com Hardware Manual 41 The following examples in this manual are based on Internet Explorer browser in order to cover all functions of the

Copyright © 2014, ACTi Corporation All Rights Reserved 7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu Dis

www.acti.com Hardware Manual 5 Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a

www.acti.com Hardware Manual 6 Safety Instructions Cleaning Disconnect this video product from the power supply before cleaning. Attachments Do not

www.acti.com Hardware Manual 7 Introduction The List of Models This hardware manual contains the following models: D21FA 1MP Box with D/N, Fixed le

www.acti.com Hardware Manual 8 E25A 1.3MP Box with D/N, Basic WDR, SLLS, Vari-focal lens E270 10MP Box with D/N, Basic WDR, Fixed lens E271 10MP

www.acti.com Hardware Manual 9 Package Contents Camera Lens (D2xFA / E2xFA / E270) Lens (D2xVA / E2xVA / E2xA / E23B / E271) Fixed focal lens w