Acti E48 User Manual download pdf (Page 10)

www.acti.com

Hardware Manual

Installation Procedures

Step 1: Prepare for Installation

1. If necessary, install a memory card into the memory card slot of the camera. See How to

Insert the Memory Card on page 33 for detailed instructions.

2. Attach the bracket to the camera.

3. Attach the supplied drill template sticker on the ceiling or wall where the camera will be

installed.

4. Drill three (3) screw holes based on the drill template.

5. If connecting digital input or output device, such as alarms, sensors, etc., to the camera,

prepare the terminal block for connection. See How to Connect DI/DO Devices on page

23 for detailed instructions.

6. Determine whether the camera cable will go through the surface or be routed along the

surface.

If the camera cable will go through a hole on the surface, do the following:

a. Drill the cable hole (based on the drill template) on the surface.

b. Route the cable(s) from the network side through the hole on the surface.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 40 41

No comments

Acti E48 User Manual Page 10