ACTi D42 User Manual download pdf (Page 45)

www.acti.com

Firmware User’s Manual V6.03.17

Day/Night

The section Day/Night allows user to control the switching between day mode and

night mode. This section will be displayed only for day/night models.

Parameters

Description

Day/Night mode

There are three modes:

Auto: The camera will automatically switch between day mode (color)

and night mode (black/white) under certain exposure level, defined by

user at “Switch from Day mode to Night mode”.

Day: The camera always stays in day mode (color) regardless of

exposure level.

Night: The camera always stays in night mode (black/white)

regardless of exposure level.

IR LED Control

This feature is visible only in camera with built-in IR LED.

There are two modes:

Auto: The built-in IR LED will be turned on automatically upon day to

night switch and turned off upon night to day switch.

Disabled: The IR LED will be off regardless of day and night mode.

Switch from Day mode

to Night mode

The scale of 0~100 allows user define the exposure level at which the

day to night switch should happen. The higher is the value, the darker

the environment has to be to trigger the day to night switch.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 76 77

No comments

ACTi D42 User Manual Page 45