Acti I51 User Manual

Indoor Hemispheric Dome Hardware Manual I51 2014/05/07

www.acti.com Hardware Manual 10 Before Installation The camera comes with terminal blocks used when an external power adaptor and a di

www.acti.com Hardware Manual 11 3. Connect the wire with the white stripe to the 12V pin and the other to the GND pin. 4. Tight

www.acti.com Hardware Manual 12 Prepare the DI/DO Connector (Optional) Depending on your surveillance needs, you may connect digital i

www.acti.com Hardware Manual 13 To connect output devices (DO), map the pins to one of the pin combinations below: Device Pin Mappin

www.acti.com Hardware Manual 14 High Voltage DO Device Connection Even though the camera provides 12V power, this may not be enough fo

www.acti.com Hardware Manual 15 Installation Procedures There are several mounting options that you can use to install the camera. Sel

www.acti.com Hardware Manual 16 Mount Types Accessories Vertical Pole Mount Suitable when mounting the camera on a vertical pole. PMAX

www.acti.com Hardware Manual 17 Mounting on the Ceiling or Wall Step 1: Drill the Holes IMPORTANT! Before drilling the holes on the ce

www.acti.com Hardware Manual 18 Step 2: Prepare the Camera IMPORTANT: When the camera is taken out from the box, the lens is covered b

www.acti.com Hardware Manual 19 Step 3: Install the Camera Install the camera using the three (3) supplied screws. Step 4: Connect

www.acti.com Hardware Manual 2 Table of Contents Precautions 3 Safety Instructions ...

www.acti.com Hardware Manual 20 2. Attach the cover ring, take note that the arrow on the camera should be aligned with the arrow on

www.acti.com Hardware Manual 21 5. Connect the Ethernet cable from the network side to the Ethernet port of the bundled network cable

www.acti.com Hardware Manual 22 7. If using an audio input device, such as a microphone with a built-in amplifier, connect the device

www.acti.com Hardware Manual 23 Accessing the Camera Configure the IP Addresses In order to be able to communicate with the camera fro

www.acti.com Hardware Manual 24 Double-click the mouse on the camera model name, the default browser of the PC is automa

www.acti.com Hardware Manual 25 Use the default IP address of the camera If there is no DHCP server in the given network, the user may

www.acti.com Hardware Manual 26 Manually adjust the IP addresses of multiple cameras If there are more than one camera to be used in t

www.acti.com Hardware Manual 27 Access the Camera Now that the camera and the PC are both having their unique IP addresses and are und

www.acti.com Hardware Manual 28 The examples in this manual are based on Internet Explorer browser in order to cover all functions of

Copyright © 2014, ACTi Corporation All Rights Reserved 7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu Dis

www.acti.com Hardware Manual 3 Precautions Read these instructions You should read all the safety and operating instructions before us

www.acti.com Hardware Manual 4 Federal Communications Commission Statement This equipment has been tested and found to comply with the

www.acti.com Hardware Manual 5 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged

www.acti.com Hardware Manual 6 Safety Check Upon completion of any service or repairs to this video product, ask the service technicia

www.acti.com Hardware Manual 7 Introduction The List of Models This hardware manual contains the following models: I51 5MP Indoor Hem

www.acti.com Hardware Manual 8 Package Contents Check if the camera package comes with the following items. Camera Network Cable Audio

www.acti.com Hardware Manual 9 Physical Description Item Description 1 Reset Button Used to restore the factory default settings, i