ACTi E81 User Manual download pdf (Page 4)

www.acti.com

Streaming Explorer User’s Manual

3. User Name: Enter user name to login camera/ video server with. Default value:

Admin

4. Password: Enter password. Default value: 123456

5. HTTP Port: Enter the HTTP port number of the device. Default value: 80

6. Register Port: Enter the Registration port number of the device. Default value: 6000

7. Control Port: Enter the Control port number of the device. Default value: 6001.

8. Streaming Port: Enter the Streaming port number of the device. Default value: 6002.

9. RTSP Port: Enter the RSTP port number of the device. Default value: 7070

10. Channel No: Enter the channel number on the video server that user wishes to

connect. Default value: 1.

11. URI Path: When select media type HTTP or RTSP (media type is 7, 8, 10 or 12), user

needs to enter URI Path to communicate with device especially when user uses other

than ACTi cameras/video.

(For example:

Complete Path: http://192.169.0.100/cgi-bin/videoconfiguration.cgi

URI Path will be: cgi-bin/videoconfiguration.cgi)

12. Connection Timeout: Enter the maximum amount of time before connection is

considered to have timed out. For example: If we set it to 3 seconds, the maximum

timeout value is 3 seconds. Default value: 5 second.

13. Stream Setting: For devices that support dual stream, select Media 1 or 2 to connect

to. Default setting is none, which means that the media to connect is determined by the

Channel No.

If you select media 1 or media 2 from the drop down list, Channel no. will automatically be set

as the stream number, and will be grayed out as read only info.

14. Connect: Click this button to connect to device and start to preview. If user is not currently

connected, then “Disconnect”, “Full screen”, “Mute Off” and “Mute On” BTNs will be disabled

15. Disconnect: Click this button to disconnect with device.

16. Full Screen: Click this button to change preview window to full screen.

17. Mute Off: Click this button to turn the audio on

18. Mute On: Click this button to turn the audio off (It is the default setting of Preview)

Take Snapshot

Once you can connect to the device, you will see Snapshot tab appear and take snapshot for the

live video. Fill in the snapshot saving path and click “Take Snapshot” to execute it immediately.

1 2 3 4 5 6 7 8 9 ... 13 14

No comments

ACTi E81 User Manual Page 4